Ceramic Engineering and Science Proceedings
18 primary works • 27 total works
Book 50
Advances in Ceramic Armor IV, Volume 29, Issue 6
by Tatsuki Ohji and Andrew Wereszczak
Book 56
Book 58
Book 306
Advanced Ceramic Coatings and Interfaces
by Andrew Wereszczak and Edgar Lara-Curzio
Book 310
Ceramics in Nuclear and Alternative Energy Applications
by Andrew Wereszczak and Edgar Lara-Curzio
Book 312
Advances in Bioceramics and Biocomposites II
by Andrew Wereszczak and Edgar Lara-Curzio
Book 314
Advances in Ceramic Armor II
by Edgar Lara-Curzio and Lisa Prokurat Franks
Book 316
Synthesis and Processing of Nanostructured Materials
by Andrew Wereszczak and Edgar Lara-Curzio
Book 526
Mechanical Properties and Performance of Engineering Ceramics and Composites V
by Sanjay Mathur and Tatsuki Ohji
This volume is a compilation of papers presented in the Mechanical Behavior and Performance of Ceramics & Composites symposium during the 34th International Conference & Exposition on Advanced Ceramics and Composites (ICACC) held January 24-29, 2010, in Daytona Beach, Florida.
The Mechanical Behavior and Performance of Ceramics & Composites symposium was one of the largest symposia in terms of the number (>100) of presentations at the ICACC'10. This symposium covered wide ranging and cutting-edge topics on mechanical properties and reliability of ceramics and composites and their correlations to processing, microstructure, and environmental effects. Symposium topics included:
- Ceramics and composites for engine applications
- Design and life prediction methodologies
- Environmental effects on mechanical properties
- Mechanical behavior of porous ceramics
- Ultra high temperature ceramics
- Ternary compounds
- Mechanics & characterization of nanomaterials and devices
- Novel test methods and equipment
- Processing - microstructure - mechanical properties correlations
- Ceramics & composites joining and testing
- NDE of ceramic components
Book 527
Advanced Ceramic Coatings and Interfaces V, Volume 31, Issue 3
by Sanjay Mathur and Tatsuki Ohji
Book 529
Advances in Ceramic Armor VI, Volume 31, Issue 5
by Sanjay Mathur and Tatsuki Ohji
The Armor Ceramics Symposium was held January 25-27, 2010 in Daytona Beach, FL as part of the 34th International Conference & Exposition on Advanced Ceramics and Composites. The 8th edition of this symposium consisted of over 65 oral and poster presentations on topics such as Impact, Penetration and Material Modeling, Boron Carbide, Silicon Carbide, Dynamic Material Behavior, Transparent Materials and NDE Applications. The symposium continues to foster discussion and collaboration between academic, government and industry personnel from around the globe.
Book 530
Advances in Bioceramics and Porous Ceramics III, Volume 31, Issue 6
by Sanjay Mathur and Tatsuki Ohji
This issue contains the proceedings of the "Porous Ceramics: Novel Developments and Applications" and "Next Generation Bioceramics" symposia, which were held on January 24-29, 2010 at the Hilton Daytona Beach Resort and the Ocean Center in Daytona Beach, Florida, USA.
The interaction between ceramic materials and living organisms is a leading area of ceramics research. Novel bioceramic materials are being developed that will provide improvements in diagnosis and treatment of medical and dental conditions. In addition, bioinspired ceramics and biomimetic ceramics have generated considerable interest in the scientific community. The "Next Generation Bioceramics" symposium addressed several leading areas related to the development and use of novel bioceramics, including advanced processing of bioceramics; biomineralization and tissue-material interactions; bioinspired and biomimetic ceramics; ceramics for drug delivery; ceramic biosensors; in vitro and in vivo characterization of bioceramics; mechanical properties of bioceramics; and nanostructured bioceramics.
The "Porous Ceramics" symposium aimed to bring together engineers and scientists in the area of ceramic materials containing high volume fractions of porosity, in which the porosity ranged from nano- to millimeters. These materials have attracted significant academic and industrial attention for use in environmental applications, an area where ceramics, particularly porous ones, play a key role because of their suitable properties. Therefore, a significant number of contributions, of which some are present in this volume, was devoted to the fabrication and characterization of porous ceramics for gas purification (e.g., H2 separation and CO2 separation) as well as to particulate filtration (e.g., diesel engine soot).
A leading area of ceramics research involves the development of porous ceramics for medical, dental, and biotechnology applications. For example, porous ceramics are under development for use as bone substitutes because a porous structure may enhance tissue ingrowth. Therefore, tailoring of porosity to give specific characteristics, in terms of the amount of interconnecting cells and of the cell and cell window size is required. A joint session involving participants from bioceramics and porous ceramics symposia was therefore held in order to stimulate discussion and productive interactions between the two scientific communities.
Book 531
This issue contains 17 peer-reviewed (invited and contributed) papers covering various aspects and the latest developments related to processing, modeling and manufacturing technologies of nanoscaled materials including inorganic-organic nanocomposites, nanowire-based sensors, new generation photovoltaic cells, self-assembly of nanostructures, functional nanostructures for cell tracking and heterostructures. Each manuscript was peer-reviewed using The American Ceramic Society review process.
Book 532
Book 533
Advanced Materials for Sustainable Developments, Volume 31, Issue 9
by Sanjay Mathur and Tatsuki Ohji
Contributions from three symposia that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), inDaytona Beach,FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the symposia titles, which are listed as follows: International Symposium on Ceramics for Electric Energy Generation, Storage, and Distribution (debuted in 2010); Thermal Management Materials and Technologies (debuted in 2010); and lastly, and Advanced Sensor Technology, Developments and Applications (debuted in 2010). These new symposia emerged during this ICACC meeting due to community growth and interest, and thus each of these subject areas were established as stand-alone symposia.
The current volume represents 15 contributions from the above listed symposia that embody the latest developments in engineering ceramics for energy technologies, thermal management utilizing either highly conductive or insulating materials, as well as advances regarding the utilization of ceramics for sensors.
Book 538
Strategic Materials and Computational Design
by Sanjay Mathur and Tatsuki Ohji
Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP. Focused Session 4 was dedicated to MAX phases - a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 ...). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.
Book 570
Mechanical Properties and Performance of Engineering Ceramics and Composites VII
by Dileep Singh, Jonathan Salem, Michael Halbig, and Sanjay Mathur
Book 595
Ceramic Materials for Energy Applications IV
by Hua-Tay Lin, Yutai Katoh, Josef Matyas, Andrew L Gyekenyesi, and Michael Halbig
25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures - B
by Mrityunjay Singh and Todd Jessen
Advances in Bioceramics and Porous Ceramics VII
by Roger Narayan, Paolo Colombo, Andrew L Gyekenyesi, and Michael Halbig
A collection of 15 papers from The American Ceramic Society's 38th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 26-31, 2014. This issue includes papers presented in Symposium 5 - Next Generation Bioceramics and Biocomposites and Symposium 9 - Porous Ceramics: Novel Developments and Applications.