Building Pathology and Rehabilitation
3 primary works
Book 10
Design of Reinforced Concrete Silo Groups
by Fernando A.N. Silva, Bernardo Horowitz, Joao M.P.Q. Delgado, and Antonio C. Azevedo
This book offers a new calculation procedure of the structural behavior of grouped layout of silos, easy to use and with satisfactory responses.
Groups of reinforced concrete silos are structures commonly used in the food industry, where it is usually necessary to separate the storage of different types and sources of grain.
The grouped layout of silos has numerous benefits when compared with single-cell silos in which the emphasis is on creating further space for silage, normally referred to as interstice - a space formed between the edges of the group's cells. This economic benefit, on the other hand, raises a structural problem for the designer of this type of building, which is to assess the magnitude of bending moments and hoop forces due to the structural continuity of the walls in the interstice region of the cells. Bending moments assume extreme values exactly when the interstice is loaded and the other cells in the group are empty.
To develop the formulation of the proposed analysis models, a parametric study was carried out that allowed the adequate consideration of the variables involved.
The idea is to help professionals, engineers, industrials and academics involved in this advanced interdisciplinary field as a comprehensive guide for courses offered at different levels of learning (undergraduate and postgraduate).Book 21
This book offers a complete diagnosis of concrete samples collected from a pile cap block of residential buildings affected by internal swelling reactions. Covering an extensive laboratory campaign to evaluate the transport properties of concrete samples, as well as their physical and chemical composition using advanced techniques to analyse cores extracted from real buildings that have concrete elements affected by internal swelling reactions (ISR). It features several rehabilitation procedures, pile caps repair and rehabilitation design, executed using strengthening procedures to provide the complete restoration of the structural integrity of the element deteriorated. These rehabilitation procedures proved to be a good solution to retrofit pile cap deteriorated by expansions due to internal swelling reactions of concrete. The book also offers a systematic review of the current state of knowledge and it is a valuable resource for scientists, students, and practitioners in various scientific and engineering disciplines, namely, civil and materials engineering, as well as and other interested parties.
Book 24
Concrete Structures Deteriorated by Delayed Ettringite Formation and Alkali-Silica Reactions
by António C. Azevedo, Fernando A.N. Silva, João M.P.Q. Delgado, and Isaque Lira
This book discusses the behaviour of isolated concrete bottle-shaped struts affected by internal expansion reactions (ISR). For that purpose, the numerical modelling of damaged concrete was performed using the Concrete Damaged Plasticity Model (CDPM) implemented in ABAQUS and validated the model through Sankovich's tests. A procedure to automatically obtain the concrete plasticity and damage parameters, essential for CDPM, was developed in Matlab. The inputs were the characteristic compressive strength of the concrete, the equivalent length of the finite element mesh and the ratio between the plastic and inelastic compressive strains. The results showed that the CDPM could represent the load-bearing mechanisms of isolated concrete bottle-shaped struts for a range of several stress levels to which these elements may be subjected in the panels investigated. The numerical simulations for different expansion levels consistently captured the expected damage profile of the panels and the load corresponding to the formation of the first crack, the estimated crack opening, and the ultimate load. For the panels investigated, the reduction observed in the failure load reached values close to 70%, the increase of the tensile plastic deformation was more than 60%, and the maximum crack opening can reach an increase of 113% when compared with those observed experimentally in panels without internal swelling reactions The book also offers a systematic review of the current state of knowledge and it is a valuable resource for scientists, students, practitioners, and lecturers in various scientific and engineering disciplines, namely, civil and materials engineering, as well as and other interested parties.