Network Simulator
14 total works
Networking Essentials Textbook and Comptia Network+ N10-006 Ucertify Labs Bundle
by Jeffrey S Beasley, Piyasat Nilkaew, and Ucertify
Published 26 June 2015
CCNA Routing and Switching 200-120 web-based hands-on labs
CCNA Routing and Switching 200-120 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to...Read more
CCNA Routing and Switching 200-120 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to...Read more
CCNA Routing and Switching 200-120 web-based hands-on labs
CCNA Routing and Switching 200-120 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to land a job as a network engineer. The 400+ labs in this product cover the full range of Cisco CCNA R&S 200-120 exam topics.
These best-selling labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and troubleshoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA Routing and Switching exam. The open command environment allows you to explore configurations beyond the lab steps.
With this product as their guide, students will experience realistic network device performance as they perform a wide range hands-on configuration and troubleshooting exercises on the following topics:
• Router and switch navigation and administration
• Ethernet LAN switches
• VLANs and trunking
• Spanning Tree Protocol (STP)
• IPv4 and IPv6 addressing and subnetting
• Subnet design
• VLSM
• Route summarization
• IPv4 Access Control Lists (ACL)
• Network Address Translation (NAT)
• DHCP, HSRP, GLBP
• Router on a stick (ROAS)
CCNA Routing and Switching 200-120 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to land a job as a network engineer. The 400+ labs in this product cover the full range of Cisco CCNA R&S 200-120 exam topics.
These best-selling labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and troubleshoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA Routing and Switching exam. The open command environment allows you to explore configurations beyond the lab steps.
With this product as their guide, students will experience realistic network device performance as they perform a wide range hands-on configuration and troubleshooting exercises on the following topics:
• Router and switch navigation and administration
• Ethernet LAN switches
• VLANs and trunking
• Spanning Tree Protocol (STP)
• IPv4 and IPv6 addressing and subnetting
• Subnet design
• VLSM
• Route summarization
• IPv4 Access Control Lists (ACL)
• Network Address Translation (NAT)
• DHCP, HSRP, GLBP
• Router on a stick (ROAS)
Web-based learning and exam preparation
CompTIA Network+ N10-006 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the Network+ exam and to land a job as a network administrator. The 140+ labs in this...Read more
CompTIA Network+ N10-006 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the Network+ exam and to land a job as a network administrator. The 140+ labs in this...Read more
Web-based learning and exam preparation
CompTIA Network+ N10-006 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the Network+ exam and to land a job as a network administrator. The 140+ labs in this product cover the full range of Network+ N10-006 exam topics.
The award-winning uCertify Labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. uCertify Labs simulate real-world networking hardware, software applications and operating systems, and command-line interfaces. In addition, the labs are supplemented with 40 videos demonstrating lab solutions.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world operating system and hardware problems. You can plan your studies using Study Planner and use one of the three available study modes — Test, Learn or Review — to suit your learning style.
CompTIA Network+ N10-006 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the Network+ exam and to land a job as a network administrator. The 140+ labs in this product cover the full range of Network+ N10-006 exam topics.
The award-winning uCertify Labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. uCertify Labs simulate real-world networking hardware, software applications and operating systems, and command-line interfaces. In addition, the labs are supplemented with 40 videos demonstrating lab solutions.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world operating system and hardware problems. You can plan your studies using Study Planner and use one of the three available study modes — Test, Learn or Review — to suit your learning style.
Networking Essentials Pearson Ucertify Course and Comptia Network+ N10-006 Ucertify Labs
by Jeffrey S Beasley, Piyasat Nilkaew, and Ucertify
Published 26 June 2015
CompTIA Security+ SY0-401 web-based hands-on labs
CompTIA Security+ SY0-401 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the new Security+ exam and to land a job as a security engineer or administrator. The 130+...Read more
CompTIA Security+ SY0-401 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the new Security+ exam and to land a job as a security engineer or administrator. The 130+...Read more
CompTIA Security+ SY0-401 web-based hands-on labs
CompTIA Security+ SY0-401 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the new Security+ exam and to land a job as a security engineer or administrator. The 130+ labs in this product cover the full range of Security+ SY0-401 exam topics.
The award-winning, uCertify Labs help bridge the gap between conceptual knowledge and real-world application by providing, competency-based, interactive, online, 24x7 training. uCertify Labs simulate real-world networking hardware, software applications and operating systems, and command line interfaces. In addition, the labs are supplemented with 50 videos demonstrating lab solutions. Students can plan their studies using Study Planner and use one of the three available study modes—Test, Learn or Review to suit your learning style.
With this product as their guide, students will perform a wide range of hardware and software based activities on the following topics:
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world operating system and hardware problems. Each lab provides students with a real-world task or problem to resolve. Hardware labs help students become familiar with how to assemble computers and connect devices and software labs provide access to fully functioning simulated operating systems for a realistic hands-on experience.
CompTIA Security+ SY0-401 uCertify Labs are built on the same platform as uCertify Courses, making integration with courses easy and seamless. They also work well as stand-alone lab solutions paired with books or other courses. The uCertify platform offers single-sign on access through your school LMS system and can be integrated with all major LMS gradebooks for seamless reporting. The Educator Area provides powerful tools for setting up classes and sections and managing students. The platform comes complete with robust reporting features, including detailed student-level and course-level data.
Whether you are looking for a stand-alone solution or a supplement to a textbook or online course, CompTIA Security+ SY0-401 uCertify Labs provides students with a robust online interactive experience to enhance their retention of conceptual topics and prepare them for success in the work place.
CompTIA Security+ SY0-401 uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world skills they need to succeed on the new Security+ exam and to land a job as a security engineer or administrator. The 130+ labs in this product cover the full range of Security+ SY0-401 exam topics.
The award-winning, uCertify Labs help bridge the gap between conceptual knowledge and real-world application by providing, competency-based, interactive, online, 24x7 training. uCertify Labs simulate real-world networking hardware, software applications and operating systems, and command line interfaces. In addition, the labs are supplemented with 50 videos demonstrating lab solutions. Students can plan their studies using Study Planner and use one of the three available study modes—Test, Learn or Review to suit your learning style.
With this product as their guide, students will perform a wide range of hardware and software based activities on the following topics:
- Network Security
- Compliance and Operational Security
- Threats and Vulnerabilities
- Application, Data, and Host Security
- Access Control and Identity Management
- Cryptography
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world operating system and hardware problems. Each lab provides students with a real-world task or problem to resolve. Hardware labs help students become familiar with how to assemble computers and connect devices and software labs provide access to fully functioning simulated operating systems for a realistic hands-on experience.
CompTIA Security+ SY0-401 uCertify Labs are built on the same platform as uCertify Courses, making integration with courses easy and seamless. They also work well as stand-alone lab solutions paired with books or other courses. The uCertify platform offers single-sign on access through your school LMS system and can be integrated with all major LMS gradebooks for seamless reporting. The Educator Area provides powerful tools for setting up classes and sections and managing students. The platform comes complete with robust reporting features, including detailed student-level and course-level data.
Whether you are looking for a stand-alone solution or a supplement to a textbook or online course, CompTIA Security+ SY0-401 uCertify Labs provides students with a robust online interactive experience to enhance their retention of conceptual topics and prepare them for success in the work place.
A Practical Guide to Advanced Networking and Cisco CCENT ICND1 100-101 Network Simulator Bundle
by Jeffrey S Beasley, Piyasat Nilkaew, Wendell Odom, and Sean Wilkins
Published 11 March 2014
A Practical Guide to Advanced Networking, Third Edition takes a pragmatic, hands-on approach to teaching advanced modern networking concepts from the network administrator's point of view. Thoroughly updated for the latest networking technologies and applications, the book guides you through designing, configuring, and managing campus networks, connecting networks to...Read more
A Practical Guide to Advanced Networking, Third Edition takes a pragmatic, hands-on approach to teaching advanced modern networking concepts from the network administrator's point of view. Thoroughly updated for the latest networking technologies and applications, the book guides you through designing, configuring, and managing campus networks, connecting networks to the Internet, and using the latest networking technologies. The authors first show how to solve key network design challenges, including data flow, selection of network media, IP allocation, subnetting, and configuration of both VLANs and Layer 3 routed networks. Next, they illuminate advanced routing techniques using RIP/RIPv2, OSPF, IS-IS, EIGRP, and other protocols, and show how to address common requirements such as static routing and route redistribution. You'll find thorough coverage of configuring IP-based network infrastructure, and using powerful WireShark and NetFlow tools to analyze and troubleshoot traffic. A full chapter on security introduces best practices for preventing DoS attacks, configuring access lists, and protecting routers, switches, VPNs, and wireless networks. This book's coverage also includes IPv6, Linux-based networking, Juniper routers, BGP Internet routing, and Voice over IP (VoIP). Every topic is introduced in clear, easy-to-understand language; key ideas are reinforced with working examples, and hands-on exercises based on powerful network simulation software.Key Pedagogical FeaturesNET-CHALLENGE SIMULATION SOFTWARE provides hands-on experience with advanced router and switch commands, interface configuration, and protocols-now including RIPv2 and IS-ISWIRESHARK NETWORK PROTOCOL ANALYZER TECHNIQUES and EXAMPLES of advanced data traffic analysis throughoutPROVEN TOOLS FOR MORE EFFECTIVE LEARNING, including chapter outlines and summariesWORKING EXAMPLES IN EVERY CHAPTER to reinforce key concepts and promote masteryKEY TERMS DEFINITIONS, LISTINGS, and EXTENSIVE GLOSSARY to help you master the language of networkingQUESTIONS, PROBLEMS, and CRITICAL THINKING QUESTIONS to help you deepen your understandingCD-ROM includes Net-Challenge Simulation Software and the Wireshark Network Protocol Analyzer Software examples.
Welcome to CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs
CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to...Read more
CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to...Read more
Welcome to CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs
CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA ICND2 exam and to land a job as a network engineer. The 190 labs in this product cover the full range of Cisco CCNA ICND2 200-105 exam configuration and troubleshooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real- world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and trouble- shoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA ICND2 exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your studies using Study Planner and view detailed performance reports to verify your work.
CCNA Routing and Switching ICND2 200-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA ICND2 exam and to land a job as a network engineer. The 190 labs in this product cover the full range of Cisco CCNA ICND2 200-105 exam configuration and troubleshooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real- world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and trouble- shoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA ICND2 exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your studies using Study Planner and view detailed performance reports to verify your work.
CCENT ICND1 100-105 Network Simulator, Pearson uCertify Academic Edition Student Access Card
by Sean Wilkins and Wendell Odom
Published 15 November 2016
Welcome to CCENT CCNA ICND1 100-105 Pearson uCertify Labs
CCENT ICND1 100-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCENT ICND1 exam and to...Read more
CCENT ICND1 100-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCENT ICND1 exam and to...Read more
Welcome to CCENT CCNA ICND1 100-105 Pearson uCertify Labs
CCENT ICND1 100-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCENT ICND1 exam and to land a job as a network engineer. The 290+ labs in this product cover the full range of Cisco CCENT ICND1 100-105 exam configuration and troubleshooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and troubleshoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCENT ICND1 exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your studies using Study Planner and view detailed performance reports to verify your work.
CCENT ICND1 100-105 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCENT ICND1 exam and to land a job as a network engineer. The 290+ labs in this product cover the full range of Cisco CCENT ICND1 100-105 exam configuration and troubleshooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real-world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and troubleshoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCENT ICND1 exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your studies using Study Planner and view detailed performance reports to verify your work.
CCNA Routing and Switching 200-125 Network Simulator, Pearson uCertify Academic Edition Student Access Card
by Sean Wilkins and Wendell Odom
Published 24 January 2017
Welcome to CCNA Routing and Switching 200-125 Network Simulator Academic Edition Pearson uCertify Labs
CCNA Routing and Switching 200-125 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on...Read more
CCNA Routing and Switching 200-125 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on...Read more
Welcome to CCNA Routing and Switching 200-125 Network Simulator Academic Edition Pearson uCertify Labs
CCNA Routing and Switching 200-125 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to land a job as a network engineer. The 480+ labs in this product cover the full range of Cisco CCNA 200-125 exam configuration and trouble- shooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real- world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and trouble- shoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your stud- ies using Study Planner and view detailed performance reports to verify your work.
CCNA Routing and Switching 200-125 Network Simulator, Academic Edition Pearson uCertify Labs is an online, hands-on skills enhancement tool that helps students gain the real-world configuration and troubleshooting skills they need to succeed on the Cisco CCNA exam and to land a job as a network engineer. The 480+ labs in this product cover the full range of Cisco CCNA 200-125 exam configuration and trouble- shooting topics.
These best-selling labs help bridge the gap between conceptual knowledge and real- world application by providing competency-based, interactive, online, 24x7 training. The labs simulate real-world networking hardware that you configure and trouble- shoot using the Cisco Command Line Interface (CLI). Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. The open command environment allows you to explore configurations beyond the lab steps.
uCertify Labs build upon the same great platform benefits and flexibility that have become synonymous with the uCertify Courses. Students can feel safe working in this virtual environment resolving real-world networking problems. You can plan your stud- ies using Study Planner and view detailed performance reports to verify your work.
Solutions Guide for CCNA 640-802 Network Simulator, Academic Edition
by Wendell Odom
Published 25 March 2012
CCENT ICND1 100-105 Network Simulator, Download Version
by Sean Wilkins and Wendell Odom
Published 15 August 2017
CCENT ICND1 100-105 Network Simulator helps you develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 250 structured labs designed to help you learn by doing, the most...Read more
CCENT ICND1 100-105 Network Simulator helps you develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 250 structured labs designed to help you learn by doing, the most effective method of learning.
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCENT
exam. Unlike other simulators on the market, the lab scenarios included in the CCENT ICND1 100-105 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Master the hands-on skills needed to succeed on the CCENT exam, including:
* Router and switch navigation and administration
* Ethernet LAN switches
* VLANs, trunking, and switch security
* Connected and static routes
* RIPv2 configuration and verification
* Access Control Lists (ACL)
* NAT, syslog, and NTP configuration
* IPv4 and IPv6 addressing and subnetting
* Network troubleshooting
CCENT ICND1 100-105 Network Simulator includes four different types of labs and over 3,000 hands-on tasks that help you build the skills needed to succeed on the exam and in the real world.
Skill Builder labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* Router and switch CLI navigation
* Interface status, ping, and traceroute
* Configuring IP addresses and DHCP servers
* VLAN and trunking configuration
* Switch security
* Connected, static, and default routes
* RIPv2 configuration and verification
* ACL analysis and configuration
* NAT configuration
* Syslog and NTP configuration
Subnetting Exercises labs help you to perform subnetting calculations quickly and accurately, a critical skill for
success on the CCENT exam. Topics covered include:
* IPv4 and IPv6 subnet ID calculation
* IP address rejection
* IP route selection
* VLSM overlaps
* IPv6 EUI-64 calculation
* Selecting VLSM routes
Configuration Scenario labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills to the test. Topics covered include:
* Network fundamentals and administration
* IP addressing
* Static and default routing
* RIPv2 configuration
* Standard and extended ACLs
* NAT configuration
Troubleshooting Scenario labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and
realistic scenarios that truly test your ability to perform the job of a network engineer. Topics covered include:
* Switch forwarding
* VLAN troubleshooting
* Path analysis
* Port security
* Network discovery
* IP addressing and routing
* DHCP server troubleshooting
* NAT
System Requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, 10.10, or 10.9
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCENT
exam. Unlike other simulators on the market, the lab scenarios included in the CCENT ICND1 100-105 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Master the hands-on skills needed to succeed on the CCENT exam, including:
* Router and switch navigation and administration
* Ethernet LAN switches
* VLANs, trunking, and switch security
* Connected and static routes
* RIPv2 configuration and verification
* Access Control Lists (ACL)
* NAT, syslog, and NTP configuration
* IPv4 and IPv6 addressing and subnetting
* Network troubleshooting
CCENT ICND1 100-105 Network Simulator includes four different types of labs and over 3,000 hands-on tasks that help you build the skills needed to succeed on the exam and in the real world.
Skill Builder labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* Router and switch CLI navigation
* Interface status, ping, and traceroute
* Configuring IP addresses and DHCP servers
* VLAN and trunking configuration
* Switch security
* Connected, static, and default routes
* RIPv2 configuration and verification
* ACL analysis and configuration
* NAT configuration
* Syslog and NTP configuration
Subnetting Exercises labs help you to perform subnetting calculations quickly and accurately, a critical skill for
success on the CCENT exam. Topics covered include:
* IPv4 and IPv6 subnet ID calculation
* IP address rejection
* IP route selection
* VLSM overlaps
* IPv6 EUI-64 calculation
* Selecting VLSM routes
Configuration Scenario labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills to the test. Topics covered include:
* Network fundamentals and administration
* IP addressing
* Static and default routing
* RIPv2 configuration
* Standard and extended ACLs
* NAT configuration
Troubleshooting Scenario labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and
realistic scenarios that truly test your ability to perform the job of a network engineer. Topics covered include:
* Switch forwarding
* VLAN troubleshooting
* Path analysis
* Port security
* Network discovery
* IP addressing and routing
* DHCP server troubleshooting
* NAT
System Requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, 10.10, or 10.9
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above
CCNA Routing and Switching ICND2 200-105 Network Simulator, Download Version
by Sean Wilkins and Wendell Odom
Published 14 August 2017
The CCNA Routing and Switching ICND2 200-105 Network Simulator is a single-user software package. It helps you develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 150 structured...Read more
The CCNA Routing and Switching ICND2 200-105 Network Simulator is a single-user software package. It helps you develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 150 structured labs designed to help you learn by doing, the most effective method of learning.
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA ICND2 exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S ICND2 200-105 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Skill Builders:
These 120+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* STP and VTP configuration
* Static and dynamic EtherChannel
* Portfast configuration
* BPDU guard
* STP, VTP, Portfast, and BPDU guard configuration
* Serial configuration and authentication
* OSPF, and EIGRP configuration
* eBGP and MPLS
* ACL analysis and configuration
* HSRP, GRE tunnels, SNMP, IP SLA, and SPAN
Configuration Scenarios:
These 25 labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills
to the test. Topics covered include:
* STP and VTP
* Serial link configuration
* OSPF and EIGRP
* Router-on-a-stick to MLS
* Advanced IPv6 ACLs
* HSRP
Troubleshooting Scenarios:
These 19 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test
your ability to perform the job of a network engineer. Topics covered include:
* Path analysis and troubleshooting
* STP
* EIGRP and OSPF
* IPv6, MLS, and GRE tunnels
* Router-on-a-stick
System requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, or 10.10
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA ICND2 exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S ICND2 200-105 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Skill Builders:
These 120+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* STP and VTP configuration
* Static and dynamic EtherChannel
* Portfast configuration
* BPDU guard
* STP, VTP, Portfast, and BPDU guard configuration
* Serial configuration and authentication
* OSPF, and EIGRP configuration
* eBGP and MPLS
* ACL analysis and configuration
* HSRP, GRE tunnels, SNMP, IP SLA, and SPAN
Configuration Scenarios:
These 25 labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills
to the test. Topics covered include:
* STP and VTP
* Serial link configuration
* OSPF and EIGRP
* Router-on-a-stick to MLS
* Advanced IPv6 ACLs
* HSRP
Troubleshooting Scenarios:
These 19 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test
your ability to perform the job of a network engineer. Topics covered include:
* Path analysis and troubleshooting
* STP
* EIGRP and OSPF
* IPv6, MLS, and GRE tunnels
* Router-on-a-stick
System requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, or 10.10
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above
CCNA Routing and Switching 200-125 Network Simulator, Download Version
by Sean Wilkins and Wendell Odom
Published 14 August 2017
CCNA Routing and Switching interactive learning:
* More than 250 labs
* More than 5,000 hands-on tasks
Four Kinds of Labs:
* Skill Builders
* Subnetting Exercises
* Configuration Scenarios
* Troubleshooting Scenarios
The CCNA...Read more
* More than 250 labs
* More than 5,000 hands-on tasks
Four Kinds of Labs:
* Skill Builders
* Subnetting Exercises
* Configuration Scenarios
* Troubleshooting Scenarios
The CCNA...Read more
CCNA Routing and Switching interactive learning:
* More than 250 labs
* More than 5,000 hands-on tasks
Four Kinds of Labs:
* Skill Builders
* Subnetting Exercises
* Configuration Scenarios
* Troubleshooting Scenarios
The CCNA Routing and Switching 200-125 Network Simulator is a single-user software package. It helps users develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab
hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 400 structured labs designed to help you learn by doing, the most effective method of learning.
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S 200-125 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Master the hands-on skills needed to succeed on the CCNA exam, including:
* Router and switch navigation and administration
* Ethernet LAN switches
* VLANs, trunking, and switch security
* Connected and static routes
* RIPv2 configuration and verification
* Access Control Lists (ACL)
* NAT, syslog, and NTP configuration
* IPv4 and IPv6 addressing and subnetting
* Network troubleshooting
* STP and VTP
* OSPF and EIGRP on IPv4 and IPv6
* External BGP
* Point-to-point WANs and private WANs
* HSRP
* Network management
Skill Builders:
These 250+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* Router and switch CLI navigation
* Configuring IP addresses and DHCP
servers
* VLAN and trunking configuration
* Switch security
* STP, VTP, Portfast, and BPDU guard configuration
* Static and dynamic EtherChannel
* Serial configuration and authentication
* Connected, static, and default routes
* RIPv2, OSPF, and EIGRP configuration
* eBGP and MPLS
* ACL analysis and configuration
* NAT configuration
* Syslog, NTP, HSRP, GRE tunnels, SNMP, IP SLA, and SPAN
Subnetting Exercises:
These 80 labs help you to perform subnetting calculations quickly and accurately, a critical skill for success on the CCNA exam. Topics covered include:
* IPv4 and IPv6 subnet ID calculation
* IP address rejection
* IP route selection
* VLSM overlaps
* IPv6 EUI-64 calculation
* Selecting VLSM routes
Configuration Scenarios:
These 50+ labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills
to the test. Topics covered include:
* Network fundamentals and administration
* IP addressing
* STP and VTP
* Static and default routing
* Serial link configuration
* RIPv2, OSPF, and EIGRP
* Router-on-a-stick to MLS
* Standard and extended ACLs
* NAT configuration
* HSRP
Troubleshooting Scenarios:
These 30 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test
your ability to perform the job of a network engineer. Topics covered include:
* Switch forwarding
* VLAN troubleshooting
* Path analysis and troubleshooting
* Port security
* STP
* Network discovery
* IP addressing and routing
* DHCP server troubleshooting
* NAT
* EIGRP and OSPF
* IPv6, MLS, and GRE tunnels
* Router-on-a-stick
System requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, or 10.10
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above
* More than 250 labs
* More than 5,000 hands-on tasks
Four Kinds of Labs:
* Skill Builders
* Subnetting Exercises
* Configuration Scenarios
* Troubleshooting Scenarios
The CCNA Routing and Switching 200-125 Network Simulator is a single-user software package. It helps users develop and improve hands-on configuration and troubleshooting skills without the investment in expensive lab
hardware. This state-of-the-art, interactive simulation software enables you to practice your networking skills with more than 400 structured labs designed to help you learn by doing, the most effective method of learning.
Experience realistic network device responses as you perform each lab, which include detailed instructions, topology diagrams, critical-thinking questions, hints, and answers. Working through the labs, you will quickly become proficient with all the common Cisco IOS version 15 router and switch commands on the CCNA exam. Unlike other simulators on the market, the lab scenarios included in the CCNA R&S 200-125 Network Simulator are far more complex, challenging you to learn how to perform real-world network configuration and troubleshooting tasks.
Master the hands-on skills needed to succeed on the CCNA exam, including:
* Router and switch navigation and administration
* Ethernet LAN switches
* VLANs, trunking, and switch security
* Connected and static routes
* RIPv2 configuration and verification
* Access Control Lists (ACL)
* NAT, syslog, and NTP configuration
* IPv4 and IPv6 addressing and subnetting
* Network troubleshooting
* STP and VTP
* OSPF and EIGRP on IPv4 and IPv6
* External BGP
* Point-to-point WANs and private WANs
* HSRP
* Network management
Skill Builders:
These 250+ labs are narrowly focused, enabling you to practice your configuration skills on a single topic. Coverage includes:
* Router and switch CLI navigation
* Configuring IP addresses and DHCP
servers
* VLAN and trunking configuration
* Switch security
* STP, VTP, Portfast, and BPDU guard configuration
* Static and dynamic EtherChannel
* Serial configuration and authentication
* Connected, static, and default routes
* RIPv2, OSPF, and EIGRP configuration
* eBGP and MPLS
* ACL analysis and configuration
* NAT configuration
* Syslog, NTP, HSRP, GRE tunnels, SNMP, IP SLA, and SPAN
Subnetting Exercises:
These 80 labs help you to perform subnetting calculations quickly and accurately, a critical skill for success on the CCNA exam. Topics covered include:
* IPv4 and IPv6 subnet ID calculation
* IP address rejection
* IP route selection
* VLSM overlaps
* IPv6 EUI-64 calculation
* Selecting VLSM routes
Configuration Scenarios:
These 50+ labs are more broadly focused, combining multiple technologies into configuration scenarios that mimic real-world environments. These labs are longer and more complex, challenging you to put your configuration skills
to the test. Topics covered include:
* Network fundamentals and administration
* IP addressing
* STP and VTP
* Static and default routing
* Serial link configuration
* RIPv2, OSPF, and EIGRP
* Router-on-a-stick to MLS
* Standard and extended ACLs
* NAT configuration
* HSRP
Troubleshooting Scenarios:
These 30 labs present typical troubleshooting scenarios and require you to explore the misconfigured network, isolate the issues, and correct the problems. These are very complicated and realistic scenarios that truly test
your ability to perform the job of a network engineer. Topics covered include:
* Switch forwarding
* VLAN troubleshooting
* Path analysis and troubleshooting
* Port security
* STP
* Network discovery
* IP addressing and routing
* DHCP server troubleshooting
* NAT
* EIGRP and OSPF
* IPv6, MLS, and GRE tunnels
* Router-on-a-stick
System requirements:
Requires internet connection for product activation and updates.
Windows system requirements (minimum):
* Windows 10 (32/64-bit), Windows 8.1 (32/64-bit), or Windows 7 (32/64-bit)
* 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
* 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
* 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
* DirectX 9 graphics device with WDDM 1.0 or higher driver
* Adobe Acrobat Reader version 8 and above
Mac system requirements (minimum):
* macOS 10.12, 10.11, or 10.10
* Intel core Duo 1.83 GHz
* 512 MB RAM (1 GB recommended)
* 1.5 GB hard disk space
* 32-bit color depth at 1024x768 resolution
* Adobe Acrobat Reader version 8 and above